San Fernando, California 91340
Tel. (818) 837-7585
Fax. (818) 837-1155
Email. info@flannerytrim.com
Inventory
1. Drywall Reveal
Click on large image to see full sized
Drywall Reveal
Manufacturer's Specification
Drywall Reveals are standard extruded aluminum alloy 6063 T5 and are .050 thick. Drywall Reveals shall have a standard Mill finish. Clear Anodized and Alodine finishes as well as other factory finishes and custom paint orders are available. Refer to Finishes for details. For intersections, corners, and radius shapes see below.
Attach Drywall Reveals through the taping flange to the drywall and framing with nails, screws, or other approved fastening methods. All reveals must be cut accurately and installed with tight, neat joints. Manufacturer recommends that a carbide tip blade along with lubricant be used when cutting any aluminum trims.
For MSDS report, click "More Information (PDF)" above.
Channel Alignment Splices
Flannery is the first manufacturer to offer splices for Aluminum Drywall Reveals. Various sizes of Flannery’s Drywall Reveals are now available with Alignment Splices. Alignment Splices are suitable for butt joints, intersections, corners, and radius work. They also allow the installer to make butt joints between the framing members.
|
Part No. |
"A" Depth |
"B" Width |
Alignment Splices |
Venting Available |
| DWR 375-375 | 3/8" | 3/8" | N/A | No |
| DWR 50-125 | 1/2" | 1/8" | N/A | No |
| DWR 50-25 | 1/2" | 1/4" | Yes | No |
| DWR 50-375 | 1/2" | 3/8" | Yes | No |
| DWR 50-50 | 1/2" | 1/2" | Yes | Yes |
| DWR 50-75 | 1/2" | 3/4" | Yes | Yes |
| DWR 50-100 | 1/2" | 1" | Yes | Yes |
| DWR 50-150 | 1/2" | 1 1/2" | Yes | Yes |
| DWR 50-200 | 1/2" | 2" | Yes | Yes |
| DWR 50-300 | 1/2" | 3" | N/A | Yes |
| DWR 50-600 | 1/2" | 6" | N/A | Yes |
| DWR 625-25 | 5/8" | 1/4" | Yes | No |
| DWR 625-375 | 5/8" | 3/8" | Yes | No |
| DWR 625-50 | 5/8" | 1/2" | Yes | Yes |
| DWR 625-625 | 5/8" | 5/8" | Yes | Yes |
| DWR 625-75 | 5/8" | 3/4" | Yes | Yes |
| DWR 625-100 | 5/8" | 1" | Yes | Yes |
| DWR 625-150 | 5/8" | 1 1/2" | Yes | Yes |
| DWR 625-200 | 5/8" | 2" | Yes | Yes |
| DWR 625-300 | 5/8" | 3" | Yes | Yes |
| DWR 625-400 | 5/8" | 4" | Yes | Yes |
| DWR 200-200 | 2" | 2" | N/A | No |
Installation Detail
Intersections and Corners
Flannery offers intersections and corners for intricate building designs that utilize intersecting lines and bands around exterior or interior walls. These junctions can be produced in the field using Alignment Splices or can be ordered from the factory as prefabricated welded units to ease installation. Prefabricated intersections and corners are mitered and then welded at the nailing flanges.
Radius Shapes
Processing of a radius shape begins with a 10'0" length of material; the final part provides the installer with 9'0" of useable material
Please indicate: 1/4 circle, 1/2 circle, or full circle
Eliminating Joints
Intersecting lines can be a difficult job for even the most experienced installer. Flannery’s Square Panel System is a way to reduce the time and labor involved in joining multiple lines of trim that intersect at the same point. The Square Panel System is an excellent solution for large grid formations. Once the installer establishes the proper layout with one horizontal line and one vertical line, he can attach the first square on those lines allowing the rest of the squares to line up.
Column Application
This website presents general guidelines and suggestions for the installation of Flannery trims and products. The purpose of these general guidelines and suggestions is to aid in a successful drywall or stucco finish based on the Uniform Building Code and industry standards. No website or catalog can address all of the unique specifics or installation details that occur from one project to another. Flannery recommends that every installer be familiar, or become acquainted with, common drywall and stucco trim installation practices before installing any of Flannery's many trims and products. Flannery also recommends that the specifying architect, engineer, and general contractor be consulted with as well. This website replaces and renders obsolete all previous publications by Flannery; including catalogs, pamphlets, or other forms of literature.
