Cement Panel T-Piece

Cement Panel T-Piece (image 1 of 1)
Click on large image to see full sized

Cement Panel T-Piece (CPT)

Flannery is proud to introduce the Cement Panel T-Piece (CPT). This trim allows for a horizontal reveal between two fiber cement panels. It is compatible with Fiber Cement Panel Systems such as CertainTeed's Fiber Cement Siding and HardiePanel® siding.

Manufacturer's Specification

The Cement Panel T-Piece is standard extruded aluminum alloy 6063 T5 and are .050" thick. All T-Pieces shall have a standard Clear Anodized or Alodine Finish. Other Anodized Colors as well as special factory finishes and custom paint orders are available. Refer to Finishes for details.

Install all Cement Panel T-Pieces over the water resistive barrier on vertical surfaces using full ten-foot lengths wherever possible. Cement Panel T-Pieces should be overlapped with a water resistive barrier over the attachment flange. Attach Cement Panel T-Pieces according to the Fiber Cement Panel manufacturer. All T-Pieces must be cut accurately and installed with tight, neat joints. Flannery recommends that a carbide tip blade along with lubricant be used when cutting any aluminum trims.

For Material Safety Data Sheet (MSDS Report), Click Here.

 

 

 

This website presents general guidelines and suggestions for the installation of Flannery trims and products. The purpose of these general guidelines and suggestions is to aid in a successful drywall or stucco finish based on the Uniform Building Code and industry standards. No website or catalog can address all of the unique specifics or installation details that occur from one project to another. Flannery recommends that every installer be familiar, or become acquainted with, common drywall and stucco trim installation practices before installing any of Flannery's many trims and products. Flannery also recommends that the specifying architect, engineer, and general contractor be consulted with as well. This website replaces and renders obsolete all previous publications by Flannery; including catalogs, pamphlets, or other forms of literature. 




 
 

300 Parkside Drive | San Fernando, California 91340 | Tel. (818) 837-7585 | Fax. (818) 837-1155 | Email. info@flannerytrim.com

Copyright © 2010 by Flannery Trim | Designed by Point One Media Inc. Point One Media Inc.