Drywall F-Mold

Trim Purpose

Specs, MSDS, and LEED Information for Flannery Trims & Products

Flannery’s Drywall Reveal F-Molds create an aesthetic division between drywall and dissimilar materials including door and window frames, ceilings, and floors. Drywall F-Molds can be used to terminate drywall at the top or bottom of vertical walls. It can also be used with gypsum board ceilings. Flannery offers many of its Drywall Reveal F-Molds with Aluminum Alignment Splices to ease the installation process and create crisp and clean butt joints and lines.

SKU: DWRF Category: Tags: ,

Product Description

Drywall F-Molds are standard extruded aluminum alloy 6063 T5 and are .050” thick. Flannery’s Drywall Reveals come in 10′ lengths and shall have a standard Mill Finish for field priming and painting unless specified otherwise. Clear Anodized and Chem-film finishes, as well as other factory finishes, and custom paint orders are available. You can view our factory finishes to see if we have what you are looking for or if you do not see the finish, you are looking for, chances are we can color-match it or we already have it! Flannery Trim wants to always make sure we can get you the right look and feel for your building project.


Drywall F-Mold

Part No. “A” Depth “B” Width Alignment Splices Stock Item Venting Available Downloads
DWRF 375-375* 3/8″ 3/8″ N/A No N/A DWG - Drywall F-MoldPDF - Drywall F-Mold
DWRF 50-125* 1/2″ 1/8″ N/A No N/A DWG - Drywall F-MoldPDF - Drywall F-Mold
DWRF 50-25 1/2″ 1/4″ Yes Yes N/A DWG - Drywall F-MoldPDF - Drywall F-Mold
DWRF 50-375 1/2″ 3/8″ Yes Yes N/A DWG - Drywall F-MoldPDF - Drywall F-Mold
DWRF 50-50 1/2″ 1/2″ Yes Yes Yes DWG - Drywall F-MoldPDF - Drywall F-Mold
DWRF 50-75 1/2″ 3/4″ Yes Yes Yes DWG - Drywall F-MoldPDF - Drywall F-Mold
DWRF 50-100 1/2″ 1″ Yes Yes Yes DWG - Drywall F-MoldPDF - Drywall F-Mold
DWRF 50-150* 1/2″ 1 1/2″ Yes No Yes DWG - Drywall F-MoldPDF - Drywall F-Mold
DWRF 50-200 1/2″ 2″ Yes Yes Yes DWG - Drywall F-MoldPDF - Drywall F-Mold
DWRF 50-300* 1/2″ 3″ N/A No Yes DWG - Drywall F-MoldPDF - Drywall F-Mold
DWRF 50-600* 1/2″ 6″ N/A No Yes DWG - Drywall F-MoldPDF - Drywall F-Mold
DWRF 625-25 5/8″ 1/4″ Yes Yes N/A DWG - Drywall F-MoldPDF - Drywall F-Mold
DWRF 625-375 5/8″ 3/8″ Yes Yes N/A DWG - Drywall F-MoldPDF - Drywall F-Mold
DWRF 625-50 5/8″ 1/2″ Yes Yes Yes DWG - Drywall F-MoldPDF - Drywall F-Mold
DWRF 625-625 5/8″ 5/8″ Yes Yes Yes DWG - Drywall F-MoldPDF - Drywall F-Mold
DWRF 625-75 5/8″ 3/4″ Yes Yes Yes DWG - Drywall F-MoldPDF - Drywall F-Mold
DWRF 625-100 5/8″ 1″ Yes Yes Yes DWG - Drywall F-MoldPDF - Drywall F-Mold
DWRF 625-150* 5/8″ 1 1/2″ Yes No Yes DWG - Drywall F-MoldPDF - Drywall F-Mold
DWRF 625-200 5/8″ 2″ Yes Yes Yes DWG - Drywall F-MoldPDF - Drywall F-Mold
DWRF 625-300* 5/8″ 3″ Yes No Yes DWG - Drywall F-MoldPDF - Drywall F-Mold
DWRF 625-400* 5/8″ 4″ Yes No Yes DWG - Drywall F-MoldPDF - Drywall F-Mold

*Indicates Modified Part

Attach Drywall Reveal F-Molds through the taping flange to the drywall and framing with nails, screws, or other approved fastening methods. All F-Molds must be cut accurately and installed with tight, neat joints. Manufacturer recommends that a carbide tip blade along with blade lubricant be used when cutting any aluminum trim. Flannery offers factory cutting and pre-fabricated intersections and corners for all drywall reveals, which can reduce labor costs and waste.


Channel Alignment Splices

Many of Flannery’s Drywall F-Mold Reveals come with Aluminum Alignment Splices to ease the installation process and create crisp and clean butt joints and lines.

Splices

install

Flannery offers pre-fabricated intersections and corners for intricate building designs that utilize intersecting lines and bands on exterior or interior walls. These junctions can be produced in the field using Alignment Splices or can be ordered from the factory as prefabricated welded units to ease installation. Prefabricated intersections and corners are mitered and then welded at the nailing flanges. Factory welded intersections and corners come with 6” legs, however custom leg lengths can be ordered. Download the Corner and Intersection form or View All of our Corner and Intersection Forms.


corners

Flannery can radius Drywall F-Mold Reveals when the trim runs along a “curved” or “radiused” plane. Radiused material is bent to a project’s dimensional requirements and is considered a custom product. Download the Radius Form or view all of our radius forms.


radius
radius
radius
radius

You may also like…