C. T Mold With Vent

Manufacturer's Specifications

Many of the sizes that Flannery offers of our T Molds are available with Vent Slots. All Vent Slots are 1/8” wide and 1” long. They are configured at 1½” on center lengthwise and ½” on center laterally. Each row of Vent Slots lengthwise provides approximately one-square inch of vented area per lineal foot (see Vent Area Graph below).

T Molds with Vent must not be installed in areas where there is solid framing, since this may block some or possibly all of the vent slots. Attach T Mold Vents to the framing with nails, screws, or other approved fastening methods. To ease installation, Flannery offers Aluminum Alignment Splices for most of its Vent Screeds. All T Molds with Vent must be cut accurately and installed with tight, neat joints. All nailing flanges must be covered with lath and all butt joints must be sealed. Manufacturer recommends that a carbide tip blade along with lubricant be used when cutting any aluminum trims. Please specify Flannery Product Code along with the phrase "with Vent" (i.e. TPM 75-200 with Vent" or TPM 75-V-200) when ordering T Molds with Vent slots.

Product Image

Installation Details