Plaster T-Mold Vent

Trim Purpose

Specs, MSDS, and LEED Information for Flannery Trims & Products

Flannery’s Plaster T-Mold Vent create a ventilation strip where a plaster soffit meets a dissimilar material or wall. Flannery’s Plaster T-Mold Vents come in a number of depths for different soffit material thicknesses as well as a number of reveal widths for just the right amount of ventilation.

Category:

Manufacturer's Specifications

Flannery’s Plaster T-Mold Vents are standard extruded aluminum alloy 6063 T5 and have a .050” nominal wall thickness. All Vent Slots are 1/8” wide, 1” long and are configured at 1½” on center lengthwise and ½” on center laterally. Each row of Vent Slots lengthwise provides approximately one-square inch of vented area per lineal foot. Aluminum Vents come in 10′ lengths and shall have a standard Clear Anodized Finish. Mill Finish (for field priming & painting), Chem-film finish or other factory finishes and custom paint orders are available. Click on Info Tab above for Factory Finishes.


tpm vent size chart - Plaster T-Mold Vent

Product No. “A” Depth “B” Width Splices Vent Slots Stock Item Approximate Vent Area Per Lineal Foot
TPM 375-V-50* 3/8″ 1/2″ N/A 1 No 1 sq. inch
TPM 375-V-75* 3/8″ 3/4″ N/A 1 No 1 sq. inch
TPM 375-V-100* 3/8″ 1″ N/A 1 No 1 sq. inch
TPM 375-V-150* 3/8″ 1-1/2″ N/A 2 No 2 sq. inch
TPM 50-V-50* 1/2″ 1/2″ N/A 1 No 1 sq. inch
TPM 50-V-75* 1/2″ 3/4″ N/A 1 No 1 sq. inch
TPM 50-V-100* 1/2″ 1″ N/A 1 No 1 sq. inch
TPM 50-V-150* 1/2″ 1-1/2″ N/A 2 No 2 sq. inch
TPM 50-V-200* 1/2″ 2″ N/A 3 No 3 sq. inch
TPM 50-V-250* 1/2″ 2-1/2″ N/A 3 No 3 sq. inch
TPM 50-V-300* 1/2″ 3″ N/A 5 No 5 sq. inch
TPM 50-V-400* 1/2″ 4″ N/A 7 No 7 sq. inch
TPM 50-V-600* 1/2″ 6″ N/A 9 No 9 sq. inch
TPM 625-V-50* 5/8″ 1/2″ N/A 1 No 1 sq. inch
TPM 625-V-75 5/8″ 3/4″ N/A 1 No 1 sq. inch
TPM 625-V-100* 5/8″ 1″ N/A 1 No 1 sq. inch
TPM 625-V-150* 5/8″ 1-1/2″ N/A 2 No 2 sq. inch
TPM 625-V-200* 5/8″ 2″ N/A 3 No 3 sq. inch
TPM 625-V-300* 5/8″ 3″ N/A 5 No 5 sq. inch
TPM 625-V-400* 5/8″ 4″ N/A 7 No 7 sq. inch
TPM 75-V-50* 3/4″ 1/2″ Yes 1 No 1 sq. inch
TPM 75-V-75 3/4″ 3/4″ N/A 1 No 1 sq. inch
TPM 75-V-100* 3/4″ 1″ Yes 1 No 1 sq. inch
TPM 75-V-150 3/4″ 1-1/2″ N/A 2 No 2 sq. inch
TPM 75-V-200* 3/4″ 2″ Yes 3 No 3 sq. inch
TPM 75-V-250* 3/4″ 2-1/2″ Yes 3 No 3 sq. inch.
TPM 75-V-300* 3/4″ 3″ Yes 5 No 5 sq. inch
TPM 75-V-400* 3/4″ 4″ Yes 7 No 7 sq. inch
TPM 75-V-600* 3/4″ 6″ Yes 9 No 9 sq. inch
*Indicates Modified Part

 

Attach Plaster T-Mold Vents to the framing with nails, screws, or other approved fastening methods. Flannery’s Aluminum Vents are also available with bug screen upon request.


t mold vent id 2 - Plaster T-Mold Vent