Smooth Finish EIFS Vent

Trim Purpose

Specs, MSDS, and LEED Information for Flannery Trims & Products

Flannery’s Smooth Finish EIFS Vents are ventilated trims that can be inserted into an exterior insulation and finishing system (EIFS) soffit. Smooth Finish EIFS Vents are installed after the EIFS substrate and final finish coat have been applied to the system. This eases the installation process and reduces the amount of labor required to install a typical soffit vent.

Category:

Manufacturer's Specifications

Flannery’s Smooth Finish EIFS Vents are standard extruded aluminum alloy 6063 T5 and have a .050” nominal wall thickness. All Vent Slots are 1/8” wide, 1” long and are configured at 1½” on center lengthwise and ½” on center laterally. Each row of Vent Slots lengthwise provides approximately one-square inch of vented area per lineal foot. Aluminum Vents come in 10′ lengths and shall have a standard Clear Anodized Finish. Mill Finish (for field priming & painting), Chem-film finish or other factory finishes and custom paint orders are available. Click on Info Tab above for Factory Finishes.

Part No. “A” Depth “B” Width Vent Slots Stock Item Approximate Vent Area Per Lineal Foot
SFEV 50-V-200 1/2″ 2″ 3 Yes 3 sq. inch
SFEV 50-V-300 1/2″ 3″ 5 Yes 5 sq. Inch
SFEV 50-V-400 1/2″ 4″ 7 Yes 7 sq. Inch

Attach Smooth Finish EIFS Vents to the framing through the center vent slot with nails, screws, or other approved fastening methods. Flannery’s Aluminum Soffit Vents are also available with bug screen upon request.

Smooth Finish EIFS Vent Panels

Flannery’s Smooth Finish EIFS Vents can also be ordered as a Vent Panel. Our Smooth Finish EIFS Vent Panel can be utilized in both new construction and retrofits. They are a perfect solution for replacing rusted out or damaged vents since they can easily be inserted into the existing vent opening. The Smooth Finish EIFS Vent Panel can be installed over existing soffit material and then fastened to the framing.

All of Flannery’s Vent Panels have a minimum .050″ thick wall, which makes them some of the sturdiest vent panels on the market. Since Flannery’s Vent Panels contain vent slots (1″ x 1/8″) and not holes, bees, wasps, and many other insects cannot fly or crawl through the vent slots. While many screen vents and other steel vents will eventually rust out, Flannery’s Vent Panels will never rust out since they are manufactured from extruded aluminum. Flannery manufactures various sizes and lengths of its Smooth Finish EIFS Vent Panels.