Plaster F-Mold

Trim Purpose

Specs, MSDS, and LEED Information for Flannery Trims & Products

Flannery’s Plaster F-Mold (FPM) is a metal stucco wall trim that creates an aesthetic termination reveal in any stucco wall system. Typically installed where a stucco wall terminates at an opposing wall or dissimilar material, the Plaster F-Mold can act as a stucco stop with a built-in reveal. Select sizes of Flannery’s Plaster F-Molds are available with Aluminum Alignment Splices to ease the installation process and create crisp and clean butt joints and lines.

View and Download the PlasterF-Mold Data Sheet Click Button to View and Download all the specs for Plaster F-Mold

SKU: FPM Category: Tags: ,

Product Details

Flannery’s F-Molds are standard extruded aluminum alloy 6063 T5 and have a .050” nominal wall thickness. Aluminum Plaster trims come in 10′ lengths and shall have a standard Clear Anodized Finish. Mill Finish (for field priming & painting), Chem-film finish, or other factory finishes, and custom paint orders are available. You can view our factory finishes to see if we have what you are looking for. If you do not see the finish, you are looking for, chances are we can color-match it or we already have it!

This product is also known in the industry as a FDM, FD, FP, and FS.


Plaster F-Mold Dimensional Drawing.
Part No. “A” Depth “B” Width Stucco Thickness Alignment Splices Stock Item Venting Available Downloads
FPM 50-25* 1/2″ 1/4″ 5/8″ N/A No No
DWG - Plaster F-Mold
PDF - Plaster F-Mold

 

FPM 50-50 1/2″ 1/2″ 5/8″ N/A Yes Yes
DWG - Plaster F-Mold
PDF - Plaster F-Mold

 

FPM 50-75 1/2″ 3/4″ 5/8″ N/A Yes Yes
DWG - Plaster F-Mold
PDF - Plaster F-Mold

 

FPM 50-100* 1/2″ 1″ 5/8″ N/A No Yes
DWG - Plaster F-Mold
PDF - Plaster F-Mold

 

FPM 50-150* 1/2″ 1-1/2″ 5/8″ N/A No Yes
DWG - Plaster F-Mold
PDF - Plaster F-Mold

 

FPM 50-200 1/2″ 2″ 5/8″ N/A No Yes
DWG - Plaster F-Mold
PDF - Plaster F-Mold

 

FPM 50-250* 1/2″ 2-1/2″ 5/8″ N/A No Yes
DWG - Plaster F-Mold
PDF - Plaster F-Mold

 

FPM 50-300* 1/2″ 3″ 5/8″ N/A No Yes
DWG - Plaster F-Mold
PDF - Plaster F-Mold

 

FPM 50-400* 1/2″ 4″ 5/8″ N/A No Yes
DWG - Plaster F-Mold
PDF - Plaster F-Mold

 

FPM 50-600* 1/2″ 6″ 5/8″ N/A No Yes
DWG - Plaster F-Mold
PDF - Plaster F-Mold

 

FPM 625-50 5/8″ 1/2″ 3/4″ N/A Yes Yes
DWG - Plaster F-Mold
PDF - Plaster F-Mold

 

FPM 625-75 5/8″ 3/4″ 3/4″ N/A Yes Yes
DWG - Plaster F-Mold
PDF - Plaster F-Mold

 

FPM 625-100* 5/8″ 1″ 3/4″ N/A No Yes
DWG - Plaster F-Mold
PDF - Plaster F-Mold

 

FPM 625-150* 5/8″ 1-1/2″ 3/4″ N/A No Yes
DWG - Plaster F-Mold
PDF - Plaster F-Mold

 

FPM 625-200 5/8″ 2″ 3/4″ N/A Yes Yes
DWG - Plaster F-Mold
PDF - Plaster F-Mold

 

FPM 625-300* 5/8″ 3″ 3/4″ N/A No Yes
DWG - Plaster F-Mold
PDF - Plaster F-Mold

 

FPM 625-400* 5/8″ 4″ 3/4″ N/A No Yes
DWG - Plaster F-Mold
PDF - Plaster F-Mold

 

FPM 75-25 3/4″ 1/4″ 7/8″ Yes Yes N/A
DWG - Plaster F-Mold
PDF - Plaster F-Mold

 

FPM 75-50 3/4″ 1/2″ 7/8″ Yes Yes Yes
DWG - Plaster F-Mold
PDF - Plaster F-Mold

 

FPM 75-75 3/4″ 3/4″ 7/8″ Yes Yes Yes
DWG - Plaster F-Mold
PDF - Plaster F-Mold

 

FPM 75-100 3/4″ 1″ 7/8″ Yes Yes Yes
DWG - Plaster F-Mold
PDF - Plaster F-Mold

 

FPM 75-150 3/4″ 1-1/2″ 7/8″ Yes Yes Yes
DWG - Plaster F-Mold
PDF - Plaster F-Mold

 

FPM 75-200 3/4″ 2″ 7/8″ Yes Yes Yes
DWG - Plaster F-Mold
PDF - Plaster F-Mold

 

FPM 75-250* 3/4″ 2-1/2″ 7/8″ Yes No Yes
DWG - Plaster F-Mold
PDF - Plaster F-Mold

 

FPM 75-300 3/4″ 3″ 7/8″ Yes Yes Yes
DWG - Plaster F-Mold
PDF - Plaster F-Mold

 

FPM 75-400 3/4″ 4″ 7/8″ Yes Yes Yes
DWG - Plaster F-Mold
PDF - Plaster F-Mold

 

FPM 75-600* 3/4″ 6″ 7/8″ N/A No Yes
DWG - Plaster F-Mold
PDF - Plaster F-Mold

 

*Indicates Modified Part

Install all Plaster F-Molds using full ten-foot lengths wherever possible. Attach Plaster F-Molds over the weather resistant barrier (WRB) to the framing with nails, screws, or other approved fastening methods. A shiplap of building paper or WRB may need to be installed over the attachment flange if the Plaster F-Mold is being used as a stucco stop. All Plaster Trims must be cut accurately and installed with tight, neat joints. All nailing flanges must be covered with lath and all butt joints must be sealed. Manufacturer recommends that a carbide tip blade along with lubricant be used when cutting any aluminum trims.


Aluminum Alignment Splices

Many of Flannery’s Plaster Channel Screeds come with Aluminum Alignment Splices to ease the installation process and create crisp and clean butt joints and lines.

splices


install

Flannery offers prefabricated corners for intricate building designs that utilize intersecting lines and bands on exterior walls. Prefabricated corners are mitered and then welded together at their attachment flanges, then vinyl tape is applied to the back of the reveal to prevent water intrusion. Factory welded corners come with 6” legs, however custom leg lengths can be ordered.

intersections and corners
intersections and corners
intersections and corners
intersections and corners

Flannery can radius Plaster F-Molds when the trim runs along a “curved” or “radiused” plane. Radiused material is bent to a project’s dimensional requirements and is considered a custom product. Download the Radius Form or view all of our radius forms.

radius
radius
radius
radius

You may also like…