2. Drywall F Mold
Click on large image to see full sized
Drywall F Mold
Manufacturer's Specification
Drywall F Molds are standard extruded aluminum alloy 6063 T5 and are .050 thick. Drywall F Molds shall have a standard Mill finish. Clear Anodized and Alodine finishes as well as other factory finishes and custom paint orders are available. Refer to Finishes for details. For intersections and corners, see Plaster F Molds.
Attach Drywall F Molds through the taping flange to the drywall and framing with nails, screws, or other approved fastening methods. All F Molds must be cut accurately and installed with tight, neat joints. Manufacturer recommends that a carbide tip blade along with lubricant be used when cutting any aluminum trims.
For MSDS report, click "More Information (PDF)" above.
Channel Alignment Splices
Flannery is the first manufacturer to offer splices for Aluminum F Molds. Various sizes of Flannery’s Drywall F Molds are now available with Alignment Splices. Alignment Splices are suitable for butt joints, intersections, corners, and radius work. They also allow the installer to make butt joints between the framing members. Refer to Alignment Splices for details.
|
Part No. |
"A" Depth |
"B" Width |
Alignment Splices |
Venting Available |
| DWRF 375-375* | 3/8" | 3/8" | N/A | No |
| DWRF 50-125* | 1/2" | 1/8" | N/A | No |
| DWRF 50-25 | 1/2" | 1/4" | Yes | No |
| DWRF 50-375 | 1/2" | 3/8" | Yes | No |
| DWRF 50-50 | 1/2" | 1/2" | Yes | Yes |
| DWRF 50-75 | 1/2" | 3/4" | Yes | Yes |
| DWRF 50-100 | 1/2" | 1" | Yes | Yes |
| DWRF 50-150* | 1/2" | 1 1/2" | Yes | Yes |
| DWRF 50-200* | 1/2" | 2" | Yes | Yes |
| DWRF 50-300* | 1/2" | 3" | N/A | Yes |
| DWRF 50-600* | 1/2" | 6" | N/A | Yes |
| DWRF 625-25 | 5/8" | 1/4" | Yes | No |
| DWRF 625-375 | 5/8" | 3/8" | Yes | No |
| DWRF 625-50 | 5/8" | 1/2" | Yes | Yes |
| DWRF 625-625 | 5/8" | 5/8" | Yes | Yes |
| DWRF 625-75 | 5/8" | 3/4" | Yes | Yes |
| DWRF 625-100 | 5/8" | 1" | Yes | Yes |
| DWRF 625-150* | 5/8" | 1 1/2" | Yes | Yes |
| DWRF 625-200 | 5/8" | 2" | Yes | Yes |
| DWRF 625-300* | 5/8" | 3" | Yes | Yes |
| DWRF 625-400* | 5/8" | 4" | Yes | Yes |
| DWRF 200-200* | 2" | 2" | N/A | No |
* Indicates Modified Part, No Returns.
Installation Detail
Intersections and Corners
Radius Shapes
This website presents general guidelines and suggestions for the installation of Flannery trims and products. The purpose of these general guidelines and suggestions is to aid in a successful drywall or stucco finish based on the Uniform Building Code and industry standards. No website or catalog can address all of the unique specifics or installation details that occur from one project to another. Flannery recommends that every installer be familiar, or become acquainted with, common drywall and stucco trim installation practices before installing any of Flannery's many trims and products. Flannery also recommends that the specifying architect, engineer, and general contractor be consulted with as well. This website replaces and renders obsolete all previous publications by Flannery; including catalogs, pamphlets, or other forms of literature.
300 Parkside Drive | San Fernando, California 91340 | Tel. (818) 837-7585 | Fax. (818) 837-1155 | Email. info@flannerytrim.com
Copyright © 2010 by Flannery Trim |
Designed by 
Point One Media Inc.