2-Piece Drip Screed Vent

Trim Purpose

Specs, MSDS, and LEED Information for Flannery Trims & Products

Flannery’s 2-Piece Drip Screed Vents act as a ventilation strip that also create a drip edge for moisture to “drip” off of stucco fascia edges thus preventing it from running back across a soffit. 2-Piece Drip Screed Vents should not be installed where a framing member runs parallel to the vent strip since it may prevent the proper movement of air.

SKU: DS-V-2pc Category: Tags: , , ,

Manufacturer's Specifications

Flannery’s 2-Piece Drip Vents are standard extruded aluminum alloy 6063 T5 and have a .050” nominal wall thickness. All Vent Slots are 1/8” wide, 1” long and are configured at 1½” on center lengthwise and ½” on center laterally. Each row of Vent Slots lengthwise provides approximately one-square inch of vented area per lineal foot. Aluminum Vents come in 10′ lengths and shall have a standard Clear Anodized Finish. Mill Finish (for field priming & painting), Chem-film finish or other factory finishes and custom paint orders are available. Click on Info Tab above for Factory Finishes.


05 2 Piece Drip Screed Vent Shape Dimen 1000 BjB - 2-Piece Drip Screed Vent

Product Number “A” Depth “B” Width Splices Vent Slots Stock Item Approx. Vent Area Per Lineal Foot
DS 50-V-50-2pc 1/2″ 1/2″ N/A 1 No 1 sq. inch
DS 50-V-75-2pc 1/2″ 3/4″ N/A 1 Yes 1 sq. inch
DS 50-V-100-2pc 1/2″ 1″ N/A 1 No 1 sq. inch
DS 50-V-150-2pc 1/2″ 1-1/2″ N/A 2 No 2 sq. inch
DS 50-V-200-2pc 1/2″ 2″ N/A 3 No 3 sq. inch
DS 50-V-250-2pc 1/2″ 2-1/2″ N/A 3 No 3 sq. inch
DS 50-V-300-2pc 1/2″ 3″ N/A 5 No 5 sq. inch
DS 50-V-400-2pc 1/2″ 4″ N/A 7 No 7 sq. inch
DS 625-V-50-2pc 5/8″ 1/2″ N/A 1 Yes 1 sq. inch
DS 625-V-75-2pc 5/8″ 3/4″ N/A 1 Yes 1 sq. inch
DS 625-V-100-2pc 5/8″ 1″ N/A 1 No 1 sq. inch
DS 625-V-150-2pc 5/8″ 1-1/2″ N/A 2 No 2 sq. inch
DS 625-V-200-2pc 5/8″ 2″ N/A 3 Yes 3 sq. inch
DS 625-V-300-2pc 5/8″ 3″ N/A 5 No 5 sq. inch
DS 625-V-400-2pc 5/8″ 4″ N/A 7 No 7 sq. inch
DS 75-V-100-2pc 3/4″ 1″ N/A 1 Yes 1 sq. inch
DS 75-V-150-2pc 3/4″ 1-1/2″ Yes 2 Yes 2 sq. inch
DS 75-V-250-2pc 3/4″ 2-1/2″ Yes 3 No 3 sq. inch
DS 75-V-300-2pc 3/4″ 3″ Yes 5 Yes 5 sq. inch
DS 75-V-400-2pc 3/4″ 4″ Yes 7 Yes 7 sq. inch
*Indicates Modified Part

Attach 2-Piece Drip Vents to the framing with nails, screws, or other approved fastening methods. Flannery’s Aluminum Soffit Vents are also available with bug screen upon request. Select sizes of Flannery’s 2-Piece Drip Screed Vents are available with Aluminum Alignment Splices to ease the installation process and create crisp clean butt joints.


05 2 Piece Drip Screed Vent Install Detail R2 BjB - 2-Piece Drip Screed Vent
05 2 Piece Drip Screed Vent 3D Detail BjB - 2-Piece Drip Screed Vent