Brake Angle

Trim Purpose

Specs, MSDS, and LEED Information for Flannery Trims & Products

Flannery’s Brake Angle Trim is a 90° angle trim, which can be used as an inside or outside corner as well as a basic edge trim. Custom Dimensions on each flange are available.

Manufacturer's Specifications

Flannery’s Brake Angle Trim is a formed metal product. Flannery’s Brake Formed products are available in a number of metals and finishes. Most can be specified in the following metals: .040” Thick Clear Anodized Aluminum; .040” Thick Mill Finish Aluminum; 26 ga. Copper; 26 ga. Stainless Steel T-304 #2 “Mill Finish”; 26 ga. Stainless Steel T-304 #4 “Brushed” Finish; and 26 ga. Galvanized Steel. Brake Formed products come in 10’ lengths and can be ordered in custom sizes and paint finishes.

Metals Available:	Metal Code
.040″ Clear Anodized Aluminum	CA
.040″ Mill Finish Aluminum	AL
16 oz. Copper	CU
26 ga. Galvanized Steel	GS
26 ga. Stainless Steel Mill	SS
26 ga. Brushed Stainless Steel	BS

Part No.	“A” Width	“B” Width	Available Metals	Stock Item
BAT 50-50	1/2″	1/2″	All	No
BAT 50-75	1/2″	3/4″	All	No
BAT 50-100	1/2″	1″	All	No
BAT 50-150	1/2″	1-1/2″	All	No
BAT 50-200	1/2″	2″	All	No
BAT 75-75	3/4″	3/4″	All	No
BAT 75-100	3/4″	1″	All	No
BAT 75-150	3/4″	1-1/2″	All	No
BAT 75-200	3/4″	2″	All	No
BAT 100-100	1″	1″	All	No
BAT 100-150	1″	1-1/2″	All	No
BAT 100-200	1″	2	All	No
BAT 150-150	1-1/2″	1-1/2″	All	No
BAT 150-200	1-1/2″	2″	All	No
BAT 200-200	2″	2″	All	No
BAT 300-300	3″	3″	All	No
BAT 400-400	4″	4″	All	No
Custom Sizes Available