Bill Luke Marana Car Dealership featuring Direct Application E.I.F.S. Vent

Bill Luke is a car dealership chain with locations all over Arizona. Their newest edition is Bill Luke Marana which is just outside of Tucson. Flannery Trim provided 1,000 feet of our Direct Application E.I.F.S. Vent in the size DWR 50-V-600. Our Direct Application E.I.F.S Allows for airflow to go through the soffit to keep the soffit overhang dry in the Arizona heat. So not only is our vent aesthetic to look at, but it also serves a functional purpose for any stucco laden building.

More About Direct Application EIFS Vents:

Flannery’s Direct Application EIFS Vents are soffit ventilated trims that can be inserted into an exterior insulation and finishing system (EIFS) soffit. With their beveled and thinning attachment flanges, Direct Application EIFS Vents can be installed over the EIFS substrate before the final finish is applied. Flannery offers Direct Application EIFS Vents in a number of depths for different soffit material thicknesses as well as a number of reveal widths for just the right amount of ventilation.

Flannery’s Direct Application EIFS Vents are standard extruded aluminum alloy 6063 T5 and have a .050” nominal wall thickness. All Vent Slots are 1/8” wide, 1” long and are configured at 1½” on center lengthwise and ½” on center laterally. Each row of Vent Slots lengthwise provides approximately one-square inch of vented area per lineal foot. Direct Application EIFS Vents come in 10′ lengths and shall have a standard Mill Finish (for field priming & painting). Clear Anodized, Chem-film finish or other factory finishes and custom paint orders are available. You can view our factory finishes to see if we have what you are looking for or if you do not see the finish, you are looking for, chances are we can color-match it or we already have it! Flannery Trim wants to always make sure we can get you the right look and feel for your building project.