Acoustical Ceiling Transition to Drywall (ACTD)

Trim Purpose

 Specs, MSDS, and LEED Information for Flannery Trims & Products

Flannery’s Acoustical Ceiling Transition to Drywall (ACTD) allows for the transition from an upper suspended acoustical ceiling plane to a lower drywall ceiling plane. The Acoustical Ceiling Transition to Drywall comes as a two-piece trim where a Drywall Ceiling Trim Adapter (DCT) is hooked to a standard Acoustical Ceiling Cloud Transition (ACCT) trim in order to receive a layer of gypsum board. The Drywall Ceiling Trim Adapter can be utilized with either the upper or lower legs of the Transition trim depending on which plane is going to be drywall (see DCTA). Each transition trim comes with attachment clips and splices to ease its integration into the suspended ceiling system.

Manufacturer’s Specification

Flannery’s Aluminum Strata Cloud Trims are standard extruded aluminum alloy 6063 T5 and have a typical .060” nominal wall thickness or greater. Strata Cloud Trims come in 10’ lengths and shall have a standard Mill Finish (for field priming and painting) or a factory Kynar “Cloud White” paint. Other factory finishes including liquid or powder coated paint, Primer, Chem-Film and Anodizing are available. View all of our factory finishes and if you still don’t see the one you are looking for, contact us and we can get you what you need. Our Acoustical Ceiling Transition to Drywall as well as some of our other “cloud” trims can also be factory fabricated into corners to ease into any of your perimeter ceiling designs. 

suspended,ceiling,trim,acoustical,drywall,transition

Part No. “A” Depth “B” Width Ceiling
Step Down
Hardware Included Downloads
ACTD 200 2 19/32” ¾” 2” 12 Clips, 4 Splices
DWG - Acoustical Ceiling Transition to Drywall (ACTD)PDF - Acoustical Ceiling Transition to Drywall (ACTD)
ACTD 400 4 19/32” ¾” 4” 12 Clips, 4 Splices
PDF - Acoustical Ceiling Transition to Drywall (ACTD)PDF - Acoustical Ceiling Transition to Drywall (ACTD)
ACTD 600 6 19/32” ¾” 6” 12 Clips, 4 Splices
DWG - Acoustical Ceiling Transition to Drywall (ACTD)PDF - Acoustical Ceiling Transition to Drywall (ACTD)
ACTD 800 8 19/32” ¾” 8” 12 Clips, 4 Splices
DWG - Acoustical Ceiling Transition to Drywall (ACTD)PDF - Acoustical Ceiling Transition to Drywall (ACTD)
ACTD 1000 10 19/32” ¾” 10” 12 Clips, 4 Splices
DWG - Acoustical Ceiling Transition to Drywall (ACTD)PDF - Acoustical Ceiling Cloud Transition (ACTD)

Flannery Trim is happy to provide you with any insight and the ability to read engineered drawings upon request on any of your custom radius jobs. Each Acoustical Ceiling Transition to Drywall comes with attachment clips and splices to ease its integration into the suspended ceiling system.

Installation Details

Connect the Acoustical Ceiling Cloud Transition (ACCT) trim to the suspended ceiling grid using the Ceiling Grid Trim Clips included. Rotate the Ceiling Grid Trim Clip into the slots on the back of the Cloud Edge trim and tighten the lock screw. Then attach the Ceiling Grid Trim Clip to the acoustical ceiling grid.

Repeat these steps again when attaching the lower half of the Acoustical Ceiling Cloud Transition trim to the other level of the acoustical ceiling grid. Once the Cloud Transition is attached to both suspended ceiling grids, hook the Drywall Ceiling Trim Adapter (DCT) to the lower leg of the ACCT trim to connect to the drywall ceiling grid (if wanting to attach to the upper leg, see DCTA).

Insert the drywall in behind the Drywall Ceiling Trim Adapter’s thinning “mud” flange when attaching it to the suspended drywall ceiling grid. Insert a fastener through the trim’s flange and drywall edge into the grid system. Apply the compound joint over the flange and feather accordingly. Use the included Ceiling Cloud Trim Splices to connect one piece of trim to the next for level and clean butt joints. All Cloud Edge Trims must be cut accurately and installed with tight, neat joints.

install


Ceiling Cloud Splices

Use the included Ceiling Cloud Trim Splices to connect one piece of trim to the next for level and clean butt joints. All Cloud Edge trims must be cut accurately and installed with tight, neat joints. Manufacturer recommends that a carbide tip blade along with blade lubricant be used when cutting any aluminum trim.

Factory Corners

Flannery offers prefabricated Inside and Outside Corners for intricate ceiling designs that utilize the Acoustical Ceiling Transition to Drywall trim. Prefabricated corners are factory mitered and then welded together to prevent separation during the edge trim installation. Factory welded corners come with 8” legs in each direction, however, custom leg lengths can be ordered. The corners are painted to match the straight pieces of Acoustical Ceiling Transition to Drywall trim for a perfect cloud aesthetic. Each Factory Corner comes with two Ceiling Grid Clips and two Trim Splices to assist the installer.

corners

You may also like…