Brake Drip Stop

Trim Purpose

Specs, MSDS, and LEED Information for Flannery Trims & Products

Flannery’s Brake Drip Stop is a termination trim that can be used over wall openings that may require a drip edge to assist in evacuating moisture from behind a wall system. The Brake Drip Stop is a formed metal product that is available in Aluminum, Copper, Stainless and Galvanized Steel.

Manufacturer's Specifications

Flannery’s Brake Drip Stop is a formed metal product. Flannery’s Brake Formed products are available in a number of metals and finishes. Most can be specified in the following metals: .040” Thick Clear Anodized Aluminum; .040” Thick Mill Finish Aluminum; 26 ga. Copper; 26 ga. Stainless Steel T-304 #2 “Mill Finish”; 26 ga. Stainless Steel T-304 #4 “Brushed” Finish; and 26 ga. Galvanized Steel. Brake Formed products come in 10’ lengths and can be ordered in custom sizes and paint finishes.

Brake Shape

Metals Available: Metal Code
.040″ Clear Anodized Aluminum CA
.040″ Mill Finish Aluminum AL
16 oz. Copper CU
26 ga. Galvanized Steel GS
26 ga. Stainless Steel Mill SS
26 ga. Brushed Stainless Mill BS

Part No. “A” Width “B” Width Available Metals Stock Item
BDS 75-25 3/4″ 1/4″ All No
BDS 75-50 3/4″ 1/2″ All No
BDS 875-25 7/8″ 1/4″ All No
BDS 875-50 7/8″ 1/2″ All No
BDS 100-25 1″ 1/4″ All No
BDS 100-50 1″ 1/2″ All No
BDS 150-25 1-1/2″ 1/4″ All No
BDS 150-50 1-1/2″ 1/2″ All No
BDS 200-25 2″ 1/4″ All No
BDS 200-50 2″ 1/2″ All No
BDS 300-25 3″ 1/4″ All No
BDS 300-50 3″ 1/2″ All No
Custom Sizes Available

Brake formed products should be installed per the specifying architect or engineers’ instructions.


You may also like…