Drywall V-Reveals
Trim Purpose
Specs, MSDS, and LEED Information for Flannery Trims & Products
Flannery’s Drywall V-Reveals create an aesthetic division between drywall panels on vertical walls and ceilings. Drywall V-Reveals can be used to create horizontal or vertical lines and can intersect cleanly where desired. V-Reveals have a unique angle appearance once installed compared to the normally “square” look of most drywall reveals.
Manufacturer's Specifications
Drywall V-Reveals are standard extruded aluminum alloy 6063 T5 and are .050” thick. Flannery’s Drywall V-Reveals come in 10′ lengths and shall have a standard Mill Finish for field priming and painting unless specified otherwise. Clear Anodized and Chem-film finishes, as well as other factory finishes and custom paint orders are available. Click on Info Tab above for Factory Finishes.

Part No. | “A” Depth | “B” Width | “C” Width | “R” Angle | Stock Item |
DWV 375-75 | 3/8″ | 3/4″ | 1/8″ | 80° | Limited |
DWV 625-375 | 5/8″ | 3/8″ | .05″ | 35° | Limited |
DWV 625-100 | 5/8″ | 1″ | .05″ | 75° | Limited |
Attach Drywall V-Reveals through the taping flange to the drywall and framing with nails, screws, or other approved fastening methods. All reveals must be cut accurately and installed with tight, neat joints. Manufacturer recommends that a carbide tip blade along with blade lubricant be used when cutting any aluminum trim. Flannery offers factory cutting and pre-fabricated intersections and corners for all drywall reveals, which can reduce labor costs and waste.

Flannery offers pre-fabricated intersections and corners for intricate building designs that utilize intersecting lines and bands on exterior or interior walls. Prefabricated intersections and corners are mitered and then welded at the nailing flanges. Factory welded intersections and corners come with 6” legs, however custom leg lengths can be ordered.