Drywall End Enclosure
Trim Purpose
Specs, MSDS, and LEED Information for Flannery Trims & Products
Flannery’s Aluminum Drywall End Enclosures help terminate walls, partitions or cased openings. Our End Enclosures can also be used to cap the edges of “door-less” wall openings or where a wall might terminate against a window. End Enclosures completely encapsulate a stud and two layers of gypsum board.
Manufacturer’s Specification
Flannery’s Aluminum Drywall Trims are standard extruded aluminum alloy 6063 T5 and are .070” thick (typ.). Aluminum trims come in 10′ lengths and shall have a standard Mill Finish for field priming and painting unless specified otherwise. Clear Anodized and Chem-film finishes, as well as other factory finishes, and custom paint orders are available. You can view our factory finishes to see if we have what you are looking for or if you do not see the finish, you are looking for, chances are we can color-match it or we already have it! Flannery Trim wants to always make sure we can get you the right look and feel for your building project.
| Part No. | “A” Width | Stock Item | Downloads |
| DWE 3750 | 3 3/4″ | Yes |   |
| DWE 4875 | 4 7/8″ | Yes | |
| DWE 7250 | 7 1/4” | Yes | |
Attach Aluminum Drywall Trims through the taping flange to the drywall and framing with nails, screws, or other approved fastening methods. All drywall trims must be cut accurately and installed with tight, neat joints. Manufacturer recommends that a carbide tip blade along with blade lubricant be used when cutting any aluminum trim.
