Siding X-Mold
Trim Purpose
Specs, MSDS, and LEED Information for Flannery Trims & Products
Flannery’s Siding X-Mold is a trim that creates a reveal at a 90° outside corner joint where siding is installed. The Siding X-Mold creates a solid and clean corner reveal for the siding system which would normally require the siding to be mitered and laid together at the edge. With a 1″ face flange, the Siding X-Mold allows the installer to slide the siding in behind the flange and cover the unfinished edges of the siding. The larger face leg of the Siding X-Mold also allows for the possible expansion or contraction of the siding along a horizontal run.
Manufacturer's Specifications
Flannery’s Siding Trims are standard extruded aluminum alloy 6063 T5 and have a .050” nominal wall thickness. Aluminum panel trims come in 10′ lengths and shall have a standard Clear Anodized Finish. Mill Finish (for field priming & painting), Chem-film finish or other factory finishes and custom paint orders are available. Flannery has a limited stock of factory paint colors to match Trugrain made with Resysta stains, please call for availability. Click on Info Tab above for Factory Finishes.
| Part No. | “A” Width | “B” Width | Compatible Siding | Stock Item |
| SXM 625-100 | 5/8″ | 1″ | TGR 1/2″ Siding Flatboard | Yes |
| SXM 875-100 | 7/8″ | 1″ | TGR 3/4″ Hollow Board | Yes |
| SXM 1125-1250 | 1-1/8″ | 1-1/4″ | TGR 12″ Commercial Siding | Yes |
Installation of Siding Trims must be in accordance with the Siding Manufacturer’s Instructions. For TruGrain made with Resysta Siding’s installation instructions, please visit their website, www.tru-grain.com.
