Drywall Ceiling Cloud Edge Trim (DCCE)
Flannery’s Drywall Ceiling Cloud Edge (DCCE) Trim is an extruded aluminum trim that attaches to suspended drywall ceiling track to create a solid edge for a suspended drywall ceiling. The Drywall Ceiling Cloud Edge trim reduces material and labor costs by eliminating the need for attaching additional drywall and cornerbeads to finish the edges of a suspended drywall ceiling. Flannery’s Drywall Ceiling Cloud Edge trim comes in a variety of sizes to allow for multiple design effects. The edge trim also comes with attachment clips and splices to ease its integration into the suspended drywall ceiling grid.
Drywall Ceiling Cloud Edge Trims are standard extruded aluminum alloy 6063 T5 and are .070” (typ.) thick. Flannery’s Cloud Edge Trims come in 10′ lengths (custom lengths available) and shall have a standard Mill Finish (for field priming and painting) or a factory Kynar White paint unless specified otherwise. Clear Anodized, Chem-film finish, as well as other factory finishes and custom paint orders are available.
|Part No.||Face Width||Leg Width||Drywall Thickness||Hardware Slots|
|DCCE 400 (Shown)||4-1/8”||7/8”||5/8”||2|
Connect Drywall Ceiling Cloud Edge trims to the suspended ceiling grid using the Ceiling Grid Trim Clips included. Rotate the Ceiling Grid Trim Clip into the slots on the back of the Cloud Edge trim and tighten the lock screw. Then attach the Ceiling Grid Trim Clip to the suspended drywall ceiling grid. Insert the drywall in behind the Drywall Ceiling Cloud Trim’s thinning “mud” flange when attaching it to the suspended drywall ceiling grid. Insert a fastener through the trim’s flange, drywall edge and into the grid system. Then apply compound joint over the flange and feather accordingly.
Use the included Ceiling Cloud Trim Splices to connect one piece of trim to the next for level and clean butt joints. All Cloud Edge Trims must be cut accurately and installed with tight, neat joints. Manufacturer recommends that a carbide tip blade along with blade lubricant be used when cutting any aluminum trim.
Flannery offers pre-fabricated Inside and Outside Corners for intricate ceiling designs that utilize the Drywall Ceiling Cloud Edge Trim. Pre-fabricated corners are factory mitered and then welded together to prevent separation during the installation of the edge trim. Factory welded corners come with 8” legs in each direction, however, custom leg lengths can be ordered.
Radius Ceiling Clouds
In addition to pre-fabricated corners, Flannery can also radius the Cloud Edge Trims to create unique “cloud” designs for a suspended drywall ceiling. Flannery is capable of bending our Drywall Ceiling Cloud Edge trim in house to keep costs down and get most radius jobs done quickly. Contact us for a cloud edge radius fabrication form if you need a quote or to place an order.