LED Drywall Pocket Trim
Specs, MSDS, and LEED Information for Flannery Trims & Products
Flannery’s LED Drywall Pocket Trim is a drywall trim that creates a small pocket in a wall or ceiling to allow for the installation of a LED light strip. The LED Drywall Pocket Trim hides the LED light strip from direct view and creates a pocket or return in a gypsum wall or ceiling and can be combined with a flat strip of aluminum or other metal to create a reflective light effect (LED’s and wiring are not provided).
Flannery’s LED Drywall Pocket Trims are standard extruded aluminum alloy 6063 T5 and are .050” thick. Aluminum trims come in 10′ lengths and shall have a standard Mill Finish for field priming and painting unless specified otherwise. Clear Anodized and Chem-film finishes, as well as other factory finishes and custom paint orders are available. Click on Info Tab for Factory Finishes.
|Part no.||“A” Depth||“B” Width||Stock Item|
Attach Aluminum Drywall Trims through the taping flange to the drywall and framing with nails, screws, or other approved fastening methods. All drywall trims must be cut accurately and installed with tight, neat joints. Manufacturer recommends that a carbide tip blade along with blade lubricant be used when cutting any aluminum trim. Installer must consult with LED manufacturer for LED light strip installation and wiring procedures and methods.
Flannery offers pre-fabricated Inside and Outside Corners for intricate wall designs that utilize an LED reveal around corners. Pre-fabricated corners are mitered and then welded at the nailing flanges. Factory welded corners come with 6” legs, however custom leg lengths can be ordered. In addition to pre-fabricated corners, Flannery also provides wiring notches in the side wall of the Reflective LED Drywall Trim to allow for the wiring of the LED strips to return back to the power source.