LED Panel Screed (LPS)
Specs, MSDS, and LEED Information for Flannery Trims & Products
Flannery’s LED Panel Screeds (LPS) create a linear light reveal between millwork panels on vertical walls or ceilings. The LED Panel Screeds have a 3/16” key to hide the unfinished edges of the millwork paneling. Flannery’s LED Panel Screed comes with a frosted diffuser and allows for a ½” wide or smaller LED strip to be applied to the aluminum reveal (LED’s and wiring are not provided).
LED Panel Screeds are standard extruded aluminum alloy 6063 T5 and are .050” thick. Flannery’s LED Reveals come in 10′ lengths and shall have a standard Mill Finish for field priming and painting unless specified otherwise. Clear Anodized and Chem-film finishes, as well as other factory finishes and custom paint orders are available. Click on Info Tab for Factory Finishes.
|Part No.||“A” Depth||“B” Width||Panel Size||Stock Item|
Attach LED Panel Screeds through their attachment flanges to the framing with screws or other approved fastening methods. All reveals and diffusers must be cut accurately and installed with tight, neat joints. Manufacturer recommends that a carbide tip blade along with blade lubricant be used when cutting any aluminum trim. The frosted diffuser should be cut with a double edged blade to reduce cracking. Installer must consult with LED manufacturer for LED light strip installation and wiring procedures and methods.
Flannery offers pre-fabricated Inside and Outside Corners as well as 90° L-Intersections for intricate wall designs that utilize an LED reveal. Pre-fabricated corners and intersections are mitered and then welded at the nailing flanges. Factory welded intersections and corners come with 6” legs, however custom leg lengths can be ordered.
In addition to pre-fabricated corners, Flannery also provides wiring notches in the aluminum reveal behind the diffuser to allow for the wiring of the LED strips to return back to the power source. These notches are concealed once the diffuser is in place.