Plaster Window Return
Trim Purpose
Specs, MSDS, and LEED Information for Flannery Trims & Products
Flannery’s Plaster Window Return creates an aesthetic termination point where a stucco wall terminates at a recessed window frame. Typically installed where a stucco wall terminates at the recess for a window opening, the Plaster Window Return acts as a stucco stop.
Product Details
Flannery’s Plaster Window Return Trims are standard extruded aluminum alloy 6063 T5 and are .050 thick. Window Returns come in 10′ lengths and shall have a standard Clear Anodized finish. Mill and Alodine finishes as well as other factory finishes and custom paint orders are available. Click on Info Tab above for Factory Finishes. You can view our factory finishes to see if we have what you are looking for or if you do not see the finish, you are looking for, chances are we can color-match it or we already have it! Flannery Trim wants to always make sure we can get you the right look and feel for your building project.
| Part No. | “A” Width | “B” Width | Stucco Thickness | Stock Item |
| WRPG 75-225 | 3/4″ | 2 1/4″ | 7/8″ | Limited |
Install all Window Returns using full ten-foot lengths wherever possible. Attach Window Returns to the framing with nails, screws, or other approved fastening methods. All Window Returns must be cut accurately and installed with tight, neat joints. All nailing flanges must be covered with lath and all butt joints must be sealed. Manufacturer recommends that a carbide tip blade along with lubricant be used when cutting any aluminum trims. A bead of sealant must be applied where the Window Return meets the window frame to help prevent water intrusion.
