Plaster Short V-Reveal
Trim Purpose
Specs, MSDS, and LEED Information for Flannery Trims & Products
Flannery’s Plaster Short V-Reveal creates an aesthetic reveal in any stucco wall system. Plaster Short V-Reveals break up plaster or stucco walls by creating horizontal and vertical reveal lines. Flannery’s Plaster Short V-Reveals are shallow and have a unique angled reveal compared to the “square-shaped” Plaster Control Joint.
Product Details
Flannery’s Plaster V-Reveals are standard extruded aluminum alloy 6063 T5 and have a .050” nominal wall thickness. Plaster V-Reveals come in 10′ lengths and shall have a standard Clear Anodized Finish. Mill Finish (for field priming & painting), Chem-film finish or other factory finishes and custom paint orders are available. You can view our factory finishes to see if we have what you are looking for or if you do not see the finish, you are looking for, chances are we can color-match it or we already have it! Flannery Trim wants to always make sure we can get you the right look and feel for your building project.
This product is also known in the industry as a PCSV-75-Short and PCV.
| Part No. | “A” Depth | “B” Width | Stucco Thickness | Vinyl Connector | Stock Item | Downloads |
|---|---|---|---|---|---|---|
| SV 625-75 | 5/8″ | 3/4″ | 3/4″ | Yes | Yes |
 
|
| SV 75-75 | 3/4″ | 3/4″ | 7/8″ | Yes | Yes |
|
Install all Plaster V-Reveals using full ten-foot lengths wherever possible. Attach Plaster V-Reveals over the weather resistant barrier to the framing with nails, screws, or other approved fastening methods. All Plaster Trims must be cut accurately and installed with tight, neat joints. All nailing flanges must be covered with lath and all butt joints must be sealed. Manufacturer recommends that a carbide tip blade along with lubricant be used when cutting any aluminum trims.
To assist the installer, Flannery provides vinyl connector clips for its Plaster Short V-Reveal.
Flannery offers prefabricated intersections and corners for intricate building designs that utilize intersecting lines and bands on exterior walls. Prefabricated intersections and corners are mitered and then welded together at their attachment flanges, then vinyl tape is applied to the back of the reveal to prevent water intrusion. Factory welded intersections and corners come with 6” legs, however custom leg lengths can be ordered.
Flannery can radius Short V-Reveals when the trim runs along a “curved” or “radiused” plane. Radiused material is bent to a project’s dimensional requirements and is considered a custom product. Download the Radius Form or view all of our radius forms.
