Self-Weeping Window Drip
Trim Purpose
Specs, MSDS, and LEED Information for Flannery Trims & Products
Flannery’s Self-Weeping Window Drip (SWWD) acts as a window drip that prevents moisture from entering the head assembly of any window opening in a stucco wall system. The Self-Weeping Window Drip comes with an offset attachment flange to allow for window head movement.
Product Details
Flannery’s Self-Weeping Window Drips are standard extruded aluminum alloy 6063 T5 and have a .060” nominal wall thickness. Aluminum Plaster trims come in 10′ lengths and shall have a standard Clear Anodized Finish. Mill Finish (for field priming & painting), Chem-film finish or other factory finishes and custom paint orders are available. You can view our factory finishes to see if we have what you are looking for or if you do not see the finish, you are looking for, chances are we can color-match it or we already have it! Flannery Trim wants to always make sure we can get you the right look and feel for your building project.
| Part No. | Stock Item | Downloads | |
| SWWD | Yes |
  |
|
Install all Self-Weeping Window Drips over the window. Fasteners should only be inserted into the top 1½” of the attachment flange. Attach the Self-Weeping Window Drip to the framing with nails, screws, or other approved fastening methods. The next horizontal layer of building paper or weather resistant barrier should overlap the 3½” attachment flange. All window drips must be cut accurately and installed with tight neat joints. A bead of sealant must be installed between the bottom drip edge of the Self-Weeping Window Drip and the top of the window frame. All nailing flanges must be covered with lath and all butt joints must be sealed. Manufacturer recommends that a carbide tip blade along with lubricant be used when cutting any aluminum trims.
